Welcome to the MINDSTORMS Community!

A place for you to explore & share your Robots

Ultimate on the Hand Bot Profile

Comments

10

That thing is so cool!!!!!


Great Design! One question. What is the point of having a laser on a multi-tool? Do u use it in the military?


It was just an extra feature!


great project! maybe you could add a light sensor so the flashlight comes on when it's dark?


Great idea! I will!


you should also add music player to it for when the person that is using it is bored


Good idea!


LDD please!


interesting

Ultimate on the Hand Bot

Botdesigner

10/25/2012

*
*
*
*
*
0 Favorites

Made by Botdesigner. This robot won the Multi-Porpuse award for the NXTLOG Utilitybot building challenge. This is my compact "On the Hand Robot"! This robot is literally at your finger tips. You can wear this robot on your hand. Because of this feature, you can take it anywhere in the house to help make your day "techie". This Robot has six different modes in its compact surface. 1. Light switch mode 2. Hammer mode 3. Gun mode 4. Flashlight mode 5. Color 2 sound mode 6. Bottle-top mode What it does: 1. Light switch mode: The NXT's display will read: "Light Switch". In this mode, when the robot gets too close to a wall where a light switch is located, it will rotate the front motor up about 250 degrees, to flip the light switch! Once the robot has flipped on the light it can now flip it off. 2. Hammer Mode: The NXT's display will read: "Hammer mode". In this mode the front motor will move up and down until you move to the next mode. 3. Gun mode: The NXT's display will read: "Gun mode". In this mode you can press the touch sensor and it will trigger a flash of colored light from the color lamp and, at the same time, a laser sound from the NXT. 4. Flashlight mode: The NXT's display will read: "Flashlight". In this mode you can press the touch sensor to change the color coming from the color lamp. Using this function you can see in the dark! 5. Bottle-top mode: The NXT's display will read: "Bottle top". In this mode you can position the secondary motor's grip on a bottle top of the right size and then press the touch sensor. The robot will give you two seconds to grab the bottle with your free hand, then the motor should twist the top off. The robot also twists the top back on. Note: The bottle top must be loosely screwed on. 6. Color 2 sound mode: The NXT's display will read: "Color2Sound". In this mode you can move the color sensor over certain colors and the NXT will make different sound tones, depending on which color is scanned.

Intelligent Brick Type:

  • 0 
    EV3 Brick
  • 0 
    NXT Brick
  • 0 
    RCX Brick

Sensors:

  • 0 
    EV3 Color
  • 0 
    EV3 Infrared
  • 0 
    EV3 Touch
  • 0 
    NXT Light
  • 0 
    NXT Sound
  • 0 
    NXT Ultrasonic
  • 0 
    NXT Touch
  • 0 
    RCX Light
  • 0 
    RCX Touch

Motors:

  • 0 
    EV3 Large
  • 0 
    EV3 Medium
  • 0 
    NXT
  • 0 
    RCX

Downloadable Files